Sustainability & Innovation
Flue Gas Velocity
Continuous flow measurement which facilitates stack velocity, volumetric flow and pollutant mass release calculations when linked to gas and dust CEMS. Choosing the best monitoring solution for your particulate emission and velocity monitoring application can be confusing. This video can help guide you to choose the right ENVEA particulate and velocity measurement technology for your application and needs.
Micro-Venturi Flue Gas Velocity CEM
STACKFLOW 100
STACKFLOW 100 is a flue gas flowmeter for continuous measurement of gas velocity, temperature and pressure in exhaust gas ducts (chimneys or flue pipes). Micro-Venturi technology.
The StackFlow 100 is a compact flowmeter for continuous measurement of velocity, temperature and static pressure in exhaust gas ducts ( stacks or flue gas ducts) using the Micro-Venturi technology. From these measurements, StackFlow 100 allows to determine the flue gas volume flow rate via an additional calculation element which is either performed by an ENVEA controller or directly by the CEMS cabinet’s data acquisition station. This data is used to calculate the mass flows of the pollutants released (dust, SO2, NOx…).
- Flow range : 3 – 30 m/s
ProPitot - Certified Differential Pressure Flowmeter
STACKFLOW 200
STACKFLOW 200 is a Certified flowmeter for emission monitoring with calculation of standardized volumetric flow rate and, if connected to ENVEA dust analyzers and meters, of mass flow.
Specifications:
- Gas Velocity Range: 3–30 m/s (main Certification Range) 3–50 m/s (extended Certification Range)
- Stack Temperature: -20 to 800°C (-4°F to 1472°F) (standard sensor) -20 to 200°C (-4°F to 392°F) (coated sensor)
- Stack Dust Concentration: Up to 1,000mg/m3 (to be tested)
- Power Supply Voltage: 24V DC
Fluesonic approved flue gas velocity CEM
STACKFLOW 400
STACKFLOW 400 is approved flue gas velocity CEM for stack velocity, volumetric flow and pollutant mass release calculations when linked to Gas and Dust CEMS.
Specifications:
- Gas Velocity: ±(0–50) m/s
- Stack Temperature: -20°C to 200°C (-4°F to 392°F)
- Power Supply: 24V DC
- Outputs: 1x RS-485 Modbus, 2x Relays, 1x 4-20mA